Sugon 212 760W 2-in-1 Soldering Iron and Hot Air Gun Rework Station

Key Features

• 2 in 1 station - hot air rework gun and T12 soldering iron integrated in one 760W unit.
• Genuine T12 cartridge iron - heater and tip in one body for fast heat-up and quick thermal recovery on heavy joints.
• 200 to 500 degree C range - covers leaded and lead-free work, from fine SMD to heavy ground planes.
• Four-value display - hot air temperature and airflow alongside the iron set temperature and actual temperature, so you can watch the tip recover.
• Three memory channels per tool - CH1, CH2 and CH3 store your temperature and airflow combinations for one-press recall.
• Brushless fan - quieter running and a longer service life than the brushed pumps used in cheaper hot air stations.
• Independent power switches - run the iron alone without spinning up the hot air side, or the reverse.
• Automatic sleep, 0 to 30 minutes - the iron powers down on its own via the stand cable, which protects the tip and saves power.
• Temperature calibration - trim the reading against a reference so the display matches the real tip temperature.
• Unit conversion and audible alerts - switch between Celsius and Fahrenheit, with sound signals for status changes.
• 220VAC 50Hz input - matches Pakistani mains directly, protected by a 5A fuse.

Technical specifications:

• Station power: 760W
• Temperature range:
  • T12 flask: 200-450°C
  • HOT AIR: 100-500°C
• Air flow regulation: 1 - 100%
• Temperature stabilization: +/-2°C
• Three working channels: CH1, CH2, CH3 (for each flask)
• HOT AIR nozzle mounting diameter: 21.5 mm
• Station power supply: 230V AC, 50/60Hz
• Packaging dimensions: 29x26x23 cm
• Weight: 2.8 kg

Kit contents:

• Sugon 212 soldering station
• T12 tip iron
• HOT AIR iron
• T12-I tip (sharp)
• HOT AIR nozzles (4 sizes)
• Power cable
• User manual