Manual TBK 761 OCA Film Laminator Machine with Vacuum Pump

$83.00
Availability: In stock
SKU:
TBK-761
This OCA attaching machine can laminating OCA to Glass for Straight LCD screen by hand. No need air compressor, no need oil.
  • Buy 2 for $82.00 each and save 1%
  • Buy 5 for $81.00 each and save 2%

It is a manual vacuum laminating machine, which has the features of wide voltage, small noise, handiness, locating accuracy.The valve behind the laminator is to control the suction of the under plate.The bigger valve is, the bigger the under suction would be. And the upper Suction power would be smaller.So, we should open the valve half, then lock it.

This video will guide you how to operate the OCA laminating machine, if you have any questions, please feel free to contact us.

The parameter of the TBK 761 OCA OCA Film Laminator Machine with Vacuum Pump:
--Voltage: 220V or 110V
--Model: TBK 761
--Power:100W
--Size: 440*203*185MM
--Net Weight: 7.5kg

Built in Vacuum Pump OCA Film Laminating Lamination Machine

TBK 761 Vacuum OCA lamination machine

TBK 761 Manual OCA laminating laminator machine for LCD glass

Operating Steps:
1. First, use the tape to seal the up and down side suction plate;
2. Put the glass in suit place, side boundary of down side suction plate, middle line of roller cover the edge of the display area of glass, make a mark by pen, and that will be easy to find the same position when you do next operation;
3. Use sharp stuff make one hole between two holes in the area which the glass covers on the down suction plate;
4. OCA glue aligns the roller, roller must be pressed onto the edge of OCA; stab open every hole in the area which the glass covers on the up suction plate to ensure the suction;
5. Plug into the power, connect the compressor tube, turn the power switch;
6. Put the glass onto the same place as marked, turn on the vacuum switch, clean the glass;
7. Tear off the protect film of the OCA, turn off the vacuum switch;
8. Press the up suction plate down to the down suction plate, and turn on the vacuum switch;
9. When it suctions the OCA, take the up suction plate up, and tear off another protect film softly;
10. Press the up suction plate to the down suction plate again, turn on the start button, after that turn off start button, whole process finished.

Features:
1. No need vacuum pump, no need air compressor.
2. Precise positioning, 100% qualification upon right operation.
3. High efficiency and easy operation.
4. Suitable for OCA polarized film laminating for straight screens.

Quality Control:
The TBK 761 OCA Machine will be tested before shipping. We provide 1 year warranty.

Safety Warning:
Please Watch out the temperature. And please keep away this machine from Children. If you don't use this machine, please pull out from socket and power off everything.

Packing:
Don't worry, we know machine is heavy, we will pack the machine very well with safe packing box or Wood Carton box.

What you get:
TBK 761 OCA OCA Film Laminator Machine with Vacuum Pump

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account